11x17x1/16″ Low Profile Instructional Desk Mat
This waterproof desk mats provides step by step instructions for using the LaMotte Waterlink Spin Touch integrated with Pool Shark H2O.
They are rubber backed so they wont slip or leave a mark.
Mats includes specific disk filling instructions for both single use and multi-use disks to help ensure everyone can get the perfect readings from a water chemical test.

4328-J LaMotte Spin Disk - (100/box) - Series 103

Enhance your testing efficiency with the LaMotte Spin Disk 4328-J Series 103. These easy to use disks will test 10 chemical factors in 60 seconds saving your team time and money. The NSF/ANSI50 Level 1 accuracy ensures your team gets the most accurate pool and spa water testing available on the market meeting or exceeding health department regulations.

Supercharge Your LaMotte Spin Touch

Enhance your LaMotte Spin Touch by integrating it with Pool Shark H2O commercial pool software. The LaMotte Spin Touch seamlessly connects with the Pool Shark H2O app, allowing you to log commercial pool water test results at the press of a button!

Experience the future of water testing with the WaterLink Spin Touch and streamline your pool and spa maintenance like never before.

Lamotte Mobile Waterlink Spin Touch is there for you, and PoolShark H2O app will seamlessly connect with the Spin Touch.

PoolShark H2O app will help you stay compliant with state and county health codes and prolong the life of your pool!

Test Factors

• Free Chlorine (DPD)
• Total Chlorine (DPD)
• Bromine (DPD)
• pH
• Calcium Hardness
• Total Alkalinity
• Cyanuric Acid
• Copper
• Iron
• Salt

Reliable Results

• Virtually Eliminates User-Error
• Pre-Measured Reagents
• Meter Calibration Check System
• New 6-Wavelength Photometer

Correct Disk Filling - Single-Use Disks

Instructions:

1. Handle with Care: Avoid touching LaMotte Spin Disk's the top and bottom. Fingerprints can interfere with light readings, affecting results. Hold the disk by the edges.
2. Prepare the Syringe: Ensure the syringe is empty by pushing the plunger down completely. You don't want leftover water from previous tests.
3. Fill the Syringe:
   • Insert the syringe tip fully into your water sample.
   • Slowly pull the plunger back to fill the syringe.
   •  To remove air bubbles, gently tap the filled syringe to release them upwards. Push a little water out to expel any remaining bubbles.
4. Position the Disk: Place the disk on a flat, clean, and dry surface. Never attempt to fill it while holding it or inside the testing device.
5. Fill the Disk:
   • Insert the syringe tip vertically into the designated fill hole on the disk. The syringe should stand upright on its own if inserted correctly.
   • Press the plunger slowly and smoothly to fill the disk.
   • Watch the water fill the chambers between the baffles in a counterclockwise direction, from bottom to top.
6. Fill to the Line: Continue adding water until the fourth chamber (the one furthest from the fill hole) fills completely to the top and slightly past the embossed fill line.
   • Overfilling is okay: Excess water will flow out of a designated overflow hole in the center, and the disk won't leak. Simply dry the disk before testing.
   • Under filling is not okay: If you stop before reaching the fill line, the test results might be inaccurate.

Additional Tips:

• Refer to your specific test kit's instructions for any variations in the filling process.
• Fill and use the disk within 10 minutes for optimal accuracy. Avoid pre-filling the disk.
• Discard the used disk after testing.

LaMotte Spin Touch Disks 4340-H Series 701 (50/Box) Outdoor Pools

Optimize your testing and analysis with the LaMotte 4340-H Series 701, a pack of 50 high-quality testing components designed to deliver accurate and reliable pool water testing results every time. 

Supercharge Your LaMotte Spin Touch

Enhance your LaMotte Spin Touch by integrating it with Pool Shark H2O commercial pool software. The LaMotte Spin Touch seamlessly connects with the Pool Shark H2O app, allowing you to log commercial pool water test results at the press of a button!

Experience the future of water testing with the WaterLink® Spin Touch® and streamline your pool and spa maintenance like never before.

LaMotte Mobile Waterlink Spin Touch is there for you, and PoolShark H2O app will seamlessly connect with the Spin Touch.

PoolShark H2O app will help you stay compliant with health department regulations and simplify pool and spa maintenance!

Disk Test Factors

• Free Chlorine (DPD)
• Bromine (DPD)
• PH
• Cyanuric Acid Stabilizer

• Triple Threat Testing: Unlike traditional test kits with multiple vials and procedures, the LaMotte 4340-H disk simplifies the process by testing three key water parameters simultaneously: Free Chlorine, (or Bromine), pH and Cyanuric Acid Stabilizer.
• Speed and Efficiency: Gone are the days of lengthy testing procedures. The LaMotte 4340-H disk delivers results in a remarkable 30 seconds! Simply insert the disk into your compatible LaMotte WaterLink Spin Touch photometer (sold separately), follow the on-screen prompts, and get instant, reliable readings.
• Free Chlorine (0-15.0 ppm): This test measures the level of active chlorine readily available to sanitize your pool or spa water and combat bacteria, algae, and other contaminants.
• Bromine (0-33.0 ppm): For bromine-treated pools, this section measures the total level of available bromine.
• pH (6.3-8.6 pH): This crucial test by Spin Touch Disks determines the acidity of your water. Maintaining a balanced pH level is essential for optimal sanitizer effectiveness, preventing corrosion of pool equipment, and ensuring swimmer comfort.




Correct Disk Filling - Multi-Use disks are not filled the same as single use disks

LaMotte Calibration Check Disk – Spin Touch 6 LEDs – 1705

Ensure the accuracy and reliability of your Spin Touch water testing device with the LaMotte Calibration Check Disk. Specifically designed for use with Spin Touch units equipped with 6 LEDs, this calibration check disk (model 1705) offers a simple and effective way to verify and maintain the precision of your water quality measurements.

Key Features:

• Precision Calibration: The check disk is engineered to provide consistent and accurate reference points, ensuring your Spin Touch device remains finely tuned and dependable.
• Ease of Use: Designed for straightforward application, the disk allows for quick and hassle-free calibration checks, minimizing downtime and maximizing efficiency.
• Durability: Constructed with high-quality materials, the check disk is built to withstand regular use, providing long-lasting performance.
• Compatibility: Tailored specifically for Spin Touch models with 6 LEDs, ensuring optimal compatibility and performance.

Applications:

Ideal for professionals in water quality testing, including pool and spa maintenance, environmental monitoring, and laboratory analysis, the LaMotte Calibration Check Disk is an essential tool for maintaining the integrity of your testing equipment.

Invest in accuracy and reliability with the LaMotte Calibration Check Disk – Spin Touch 6 LEDs – 1705, and ensure your water testing results are always trustworthy.

LaMotte Plastic Syringe 3ml 3 Pack (1189-3)

Keep your LaMotte WaterLink Spin Touch WaterLink Labs test kit functioning smoothly with this convenient 3-pack of replacement syringes. These durable, 3ml syringes are made from clear plastic for easy visibility and feature a graduated scale for accurate measurement.

• Features:
  • Capacity: 3ml
  • Material: Clear plastic
  • Graduated scale for accurate measurement
  • Quantity: 3 pack

LaMotte Spin Touch Disks 4334-H Series 501 (50/Box)

Optimize your testing and analysis with the LaMotte 4334-H Series 501, a pack of 50 high-quality testing components designed to deliver accurate and reliable pool water testing results every time. 

Supercharge Your LaMotte Spin Touch

Enhance your LaMotte Spin Touch by integrating it with Pool Shark H2O commercial pool software. The LaMotte Spin Touch seamlessly connects with the Pool Shark H2O app, allowing you to log commercial pool water test results at the press of a button!

Experience the future of water testing with the WaterLink® Spin Touch® and streamline your pool and spa maintenance like never before.

Lamotte Mobile Waterlink Spin Touch is there for you, and PoolShark H2O app will seamlessly connect with the Spin Touch.

PoolShark H2O app will help you stay compliant with health department regulations and simplify pool and spa maintenance!

Disk Test Factors

• Free Chlorine (DPD)
• Total Chlorine (DPD)
• Bromine (DPD)

• Triple Threat Testing: Unlike traditional test kits with multiple vials and procedures, the LaMotte 4334-H disk simplifies the process by testing three key water parameters simultaneously: Free Chlorine, Total Chlorine (or Bromine), and pH.
• Speed and Efficiency: Gone are the days of lengthy testing procedures. The LaMotte 4334-H disk delivers results in a remarkable 30 seconds! Simply insert the disk into your compatible LaMotte WaterLink Spin Touch photometer (sold separately), follow the on-screen prompts, and get instant, reliable readings.
• Free Chlorine (0-15.0 ppm): This test measures the level of active chlorine readily available to sanitize your pool or spa water and combat bacteria, algae, and other contaminants.
• Total Chlorine (0-15.0 ppm) or Bromine (0-33.0 ppm): This test indicates the combined level of free chlorine and combined chlorine (chloramines) in your water for chlorine-sanitized pools. For bromine-treated pools, this section measures the total level of available bromine.
• pH (6.3-8.6 pH): This crucial test by Spin Touch Disks determines the acidity of your water. Maintaining a balanced pH level is essential for optimal sanitizer effectiveness, preventing corrosion of pool equipment, and ensuring swimmer comfort.




Correct Disk Filling - Multi-Use disks are not filled the same as single use disks

4329-J LaMotte Spin Disk - (100/box) - Series 203

Enhance your testing efficiency with the LaMotte Spin Disk 4329-J Series 203. These easy to use disks will test 10 chemical factors in 60 seconds saving your team time and money. The NSF/ANSI50 Level 1 accuracy ensures your team gets the most accurate pool and spa water testing available on the market meeting or exceeding health department regulations.

Supercharge Your LaMotte Spin Touch

Enhance your LaMotte Spin Touch by integrating it with Pool Shark H2O commercial pool software. The LaMotte Spin Touch seamlessly connects with the Pool Shark H2O app, allowing you to log commercial pool water test results at the press of a button!

Experience the future of water testing with the WaterLink Spin Touch and streamline your pool and spa maintenance like never before.

Lamotte Mobile Waterlink Spin Touch is there for you, and PoolShark H2O app will seamlessly connect with the Spin Touch.

PoolShark H2O app will help you stay compliant with state and county health codes and prolong the life of your pool!

Test Factors

• Free Chlorine (DPD)
• Total Chlorine (DPD)
• Bromine (DPD)
• pH
• Calcium Hardness
• Total Alkalinity
• Cyanuric Acid
• Copper
• Iron
• Salt
• Phosphate

Reliable Results

• Virtually Eliminates User-Error
• Pre-Measured Reagents
• Meter Calibration Check System
• New 6-Wavelength Photometer

Correct Disk Filling - Single-Use Disks

Instructions:

1. Handle with Care: Avoid touching LaMotte Spin Disk's the top and bottom. Fingerprints can interfere with light readings, affecting results. Hold the disk by the edges.
2. Prepare the Syringe: Ensure the syringe is empty by pushing the plunger down completely. You don't want leftover water from previous tests.
3. Fill the Syringe:
   • Insert the syringe tip fully into your water sample.
   • Slowly pull the plunger back to fill the syringe.
   •  To remove air bubbles, gently tap the filled syringe to release them upwards. Push a little water out to expel any remaining bubbles.
4. Position the Disk: Place the disk on a flat, clean, and dry surface. Never attempt to fill it while holding it or inside the testing device.
5. Fill the Disk:
   • Insert the syringe tip vertically into the designated fill hole on the disk. The syringe should stand upright on its own if inserted correctly.
   • Press the plunger slowly and smoothly to fill the disk.
   • Watch the water fill the chambers between the baffles in a counterclockwise direction, from bottom to top.
6. Fill to the Line: Continue adding water until the fourth chamber (the one furthest from the fill hole) fills completely to the top and slightly past the embossed fill line.
   • Overfilling is okay: Excess water will flow out of a designated overflow hole in the center, and the disk won't leak. Simply dry the disk before testing.
   • Underfilling is not okay: If you stop before reaching the fill line, the test results might be inaccurate.

Additional Tips:

• Refer to your specific test kit's instructions for any variations in the filling process.
• Fill and use the disk within 10 minutes for optimal accuracy. Avoid pre-filling the disk.
• Discard the used disk after testing.

The Future of Water Testing

Introducing the innovative WaterLink® Spin Touch® photometer, an NSF/ANSI50 Level 1 Certified device that revolutionizes pool and spa water testing. This advanced system handles all your water testing needs with unmatched precision and convenience.

Each sealed SpinDisk® reagent cartridge contains the exact amount of reagent required for a comprehensive series of tests. Simply fill one unique SpinDisk® cartridge with less than 3 mL of water, and your vital tests are completed automatically in just 60 seconds!

This is the most advanced system ever produced for precise wet chemistry methods. Analysts can now achieve high precision without the hassle of time-consuming tests and clean-up procedures.

The WaterLink® Spin Touch® is incredibly user-friendly, making it accessible to anyone—no vials to fill, no prep time, and no guessing required!

What's Included:

• WaterLink® Spin Touch® Photometer
• Instruction Manual
• Quick-Start Instructions
• 3 Syringes
• Calibration Check Disk
• USB Cord with USB Wall Adapter

(Note: SpinDisk® reagent cartridges are sold separately.)

Supercharge Your LaMotte Spin Touch

Enhance your LaMotte Spin Touch by integrating it with Pool Shark H2O commercial pool software. The LaMotte Spin Touch seamlessly connects with the Pool Shark H2O app, allowing you to log commercial pool water test results at the press of a button!

Experience the future of water testing with the WaterLink® Spin Touch® and streamline your pool and spa maintenance like never before.

Lamotte Mobile Waterlink Spin Disks are there for you, and PoolShark H2O app will seamlessly connect with the Spin Touch.

PoolShark H2O app will help you stay compliant with county and state health department regulations and streamline pool maintenance!

Available Test Factors

• Free Chlorine (DPD)
• Total Chlorine (DPD)
• Bromine (DPD)
• pH
• Calcium Hardness
• Total Alkalinity
• Cyanuric Acid
• Copper
• Iron
• Salt
• Phosphate
• Borate
• Biguanide
• Biguanide Shock

Reliable Results

• Virtually Eliminates User-Error
• Pre-Measured Reagents
• Exact Reaction Times and Auto-Blanking
• Meter Calibration Check System
• New 6-Wavelength Photometer