LaMotte Mobile WaterLink Spin Touch – 3581

$1,145.00

Fast, Easy Pool & Spa Testing: LaMotte Mobile WaterLink Spin Touch (3581)

Take pool and spa water testing on the go with the Mobile WaterLink Spin Touch. This meter simplifies water analysis with:

  • Pre-measured reagents: Eliminate the mess and measure with single-use SpinDisks (sold separately).
  • 1-minute test results: Get accurate readings in just 60 seconds for most tests.
  • User-friendly operation: Simply fill, insert, and press start – no vials or complicated procedures.

Out of stock

Description

The Future of Water Testing

Introducing the innovative WaterLink® Spin Touch® photometer, an NSF/ANSI50 Level 1 Certified device that revolutionizes pool and spa water testing. This advanced system handles all your water testing needs with unmatched precision and convenience.

Each sealed SpinDisk® reagent cartridge contains the exact amount of reagent required for a comprehensive series of tests. Simply fill one unique SpinDisk® cartridge with less than 3 mL of water, and your vital tests are completed automatically in just 60 seconds!

This is the most advanced system ever produced for precise wet chemistry methods. Analysts can now achieve high precision without the hassle of time-consuming tests and clean-up procedures.

The WaterLink® Spin Touch® is incredibly user-friendly, making it accessible to anyone—no vials to fill, no prep time, and no guessing required!

What’s Included:

  • WaterLink® Spin Touch® Photometer
  • Instruction Manual
  • Quick-Start Instructions
  • 3 Syringes
  • Calibration Check Disk
  • USB Cord with USB Wall Adapter

(Note: SpinDisk® reagent cartridges are sold separately.)

Supercharge Your LaMotte Spin Touch

Enhance your LaMotte Spin Touch by integrating it with Pool Shark H2O commercial pool software. The LaMotte Spin Touch seamlessly connects with the Pool Shark H2O app, allowing you to log commercial pool water test results at the press of a button!

Experience the future of water testing with the WaterLink® Spin Touch® and streamline your pool and spa maintenance like never before.

Lamotte Mobile Waterlink Spin Disks are there for you, and PoolShark H2O app will seamlessly connect with the Spin Touch.

PoolShark H2O app will help you be compliant with authorities and will keep your pool running for a long time!

Available Test Factors

  • Free Chlorine (DPD)
  • Total Chlorine (DPD)
  • Bromine (DPD)
  • pH
  • Calcium Hardness
  • Total Alkalinity
  • Cyanuric Acid
  • Copper
  • Iron
  • Salt
  • Phosphate
  • Borate
  • Biguanide
  • Biguanide Shock

Reliable Results

  • Virtually Eliminates User-Error
  • Pre-Measured Reagents
  • Exact Reaction Times and Auto-Blanking
  • Meter Calibration Check System
  • New 6-Wavelength Photometer

The LaMotte WaterLink Spin Touch is a photometer that uses pre-measured reagent disks to analyze water samples. Here’s a detailed breakdown of how it works

Components:

  • Meter: The meter is the electronic device that houses the light source, detector, and processing unit. It reads the results from the reagent disk and displays the test results on a screen.
  • Reagent Disk: The Spin Touch uses special reagent disks called WaterLink Spin Disks. These single-use consumables contain pre-measured amounts of chemicals specific to the tests you want to perform. Each disk is divided into sections, with each section containing reagents for a particular test.
  • Sample Chamber: This is the compartment where you insert the filled reagent disk for testing.

Testing Process:

  1. Fill the Disk: You’ll fill the single-use WaterLink Spin Disk with your water sample using a syringe provided in the test kit. There are designated fill ports and chambers within the disk. Filling must be done carefully and precisely to the correct level for accurate results (refer to my previous response for filling instructions).

  2. Insert the Disk: Once filled, place the WaterLink Spin Disk into the sample chamber of the Spin Touch meter. The meter will typically guide you with on-screen instructions or have designated markings for proper disk insertion.

  3. Centrifugation and Analysis: When you initiate the test, the meter spins the disk at a high speed (centrifugation). This process mixes the water sample with the reagents in each chamber, creating a chemical reaction.

  4. Light Measurement: The meter shines light of specific wavelengths through the reacted solutions in each chamber of the disk. The amount of light absorbed by the solution is measured by a detector.

  5. Data Analysis and Display: The meter’s processor analyzes the light absorption data based on pre-programmed calibrations for each test. This analysis provides the final test results, which are displayed on the meter’s screen.

Benefits of LaMotte WaterLink Spin Touch:

  • Ease of Use: Pre-measured WaterLink Spin Disks eliminate the need for manual measurements and mixing chemicals, reducing the risk of errors.
  • Accuracy: Centrifugation ensures thorough mixing and consistent results.
  • Speed: Test results are typically obtained within a minute.
  • Portability: The LaMotte WaterLink Spin Touch is available in portable versions, making it suitable for on-site testing.

Things to Consider:

  • LaMotte WaterLink Spin Touch requires purchasing specific WaterLink Spin Disks for the tests you want to perform.
  • While user-friendly, it’s still important to read and follow the manufacturer’s instructions carefully for accurate testing.

Additional information

Weight 10.8 lbs
Dimensions 15 × 17 × 8 in

Reviews

There are no reviews yet.

Be the first to review “LaMotte Mobile WaterLink Spin Touch – 3581”

Your email address will not be published. Required fields are marked *